For stability analysis of slopes of purely cohesive soils, the critical centre is taken to lie at the intersection of
Anonymous Quiz
15%
(a) The perpendicular bisector of the slope and the locus of the centre
50%
(b) The perpendicular drawn at the one-third slope from the toe and the locus of the centre
24%
(c) The perpendicular drawn at the two-third slope from the toe and the locus of the centre
11%
(d) Directional angles
đ2â¤1đ¯1
Modulus of rigidity is the ratio of
Anonymous Quiz
15%
(a) Linear stress to linear strain
16%
(b) Linear stress to lateral stress
24%
(c) Volumetric strain to linear strain
45%
(d) Shear stress to shear strain
The material of a rubber balloon has Poisson's ratio of 0.5. If uniform pressure is applied to blow the balloon, the volumetric strain of the material will be
Anonymous Quiz
16%
(a) 0.25
30%
(b) 0.50
27%
(c) 0.20
27%
(d) 0.00
đ2
In the context of aerial photography. is the term for the angle formed between the right line and the edges of the photograph in the direction of the flight.
Anonymous Quiz
20%
(a) Parallactic angle
33%
(b) Drift
33%
(c) Crab
14%
(d) Differential parallax
The elevations of objects on photograph can be measured due to an aerial
Anonymous Quiz
27%
(a) Tilt
24%
(b) Drift
23%
(c) Overlap
25%
(d) Stereoscopic fusion
đ1
Please open Telegram to view this post
VIEW IN TELEGRAM
Please open Telegram to view this post
VIEW IN TELEGRAM
This media is not supported in your browser
VIEW IN TELEGRAM
https://www.instagram.com/reel/C2pAoCmRrBF/?igsh=ZXRpOGpmZ3llMGhm
đĨāĒšāǰāĢāǎāĒŋāǞ āǏāǰ āĒĻāĢāĒĩāĒžāǰāĒž āĒāĢāǰāĒĻāĒžāǰ Animation āĒĩāĒĄāĢ āĒāĒĩāĢāǝ āǰāĒžāĒŽāĒŽāĒāĒĻāĒŋāǰāǍāĢāĒ āǏāĒāĒĒāĢāǰāĢāĒŖ Technical Analysis.đ
đĨ āĒĩāĒŋāĒĄāĒŋāǝāĢ āĒāĢāĒĩāĒž āĒŽāĒžāĒāĢāǍāĢ Link â¤ĩī¸
đhttps://www.youtube.com/live/lZZXxIfB_2s?feature=shared
đĨāĒšāǰāĢāǎāĒŋāǞ āǏāǰ āĒĻāĢāĒĩāĒžāǰāĒž āĒāĢāǰāĒĻāĒžāǰ Animation āĒĩāĒĄāĢ āĒāĒĩāĢāǝ āǰāĒžāĒŽāĒŽāĒāĒĻāĒŋāǰāǍāĢāĒ āǏāĒāĒĒāĢāǰāĢāĒŖ Technical Analysis.đ
đĨ āĒĩāĒŋāĒĄāĒŋāǝāĢ āĒāĢāĒĩāĒž āĒŽāĒžāĒāĢāǍāĢ Link â¤ĩī¸
đhttps://www.youtube.com/live/lZZXxIfB_2s?feature=shared
â¤2đ1
The liquid limit and plastic limit of sample are 65% and 29% respectively. The percentage of the soil fraction with grain size finer than 0.002 mm is 24. The activity ratio of the soil sample is:
Anonymous Quiz
10%
(a) 0.50
24%
(b) 1.00
60%
(c) 1.50
5%
(d) 2.00
Find the group index of soil for sample passing 0.075 mm, sieve = 60% liquid limit = 65% and plastic limit = 40%
Anonymous Quiz
19%
(a) 20
36%
(b) None of the given options
36%
(c) 5
9%
(d) 40
đ1
The effective stress on the soil is due to the:
Anonymous Quiz
59%
(a) Both External load acting on the soil & weight of soil particles
12%
(b) Weight of soil particles
14%
(c) External load acting on the soil
15%
(d) Weight of water present in pores
đ1đ1
A masonry dam is founded on pervious sand. A factor of safety of 4 is required against boiling. For the sand, n = 45% and Gs = 2.65 The maximum permissible upward hydraulic gradient will be nearly
Anonymous Quiz
10%
(a) 0.18
46%
(b) 0.23
28%
(c) 0.28
16%
(d) 0.33
đ1
Where should splices in column be provided?
Anonymous Quiz
7%
(a) At the floor level
27%
(b) At the mid height of column
25%
(c) At the beam column joint
41%
(d) At one-fourth height of column
đ¯1
A Steel member IS designed with consideration for failure governed by buckling. What should be the partial factor of safety for materials to be considered?
Anonymous Quiz
9%
(a) 0.90
18%
(b) 1.00
56%
(c) 1.10
17%
(d) 1.25
đ¯2
In plastic analysis, the shape factor for triangular section is
Anonymous Quiz
13%
(a) 1.5
52%
(b) 2.34
30%
(c) 1.7
5%
(d) 2.5
The suitable method for irrigating highly modulating land is:
Anonymous Quiz
19%
(a) drip irrigation
19%
(b) furrow irrigation
59%
(c) sprinkler irrigation
3%
(d) None of the above
đ¯1
Water table drops by 3 m in an irrigable land of 50 hectares. if porosity and specific retention are 0.30 and 0.10 respectively the change in storage in hectare-metre is
Anonymous Quiz
12%
(a) 60
43%
(b) 45
38%
(c) 30
7%
(d) 15
In case of channel routing, the storage is a function of
Anonymous Quiz
10%
(a) Inflow discharge only
18%
(b) Outflow discharge only
69%
(c) Both (a) and (b)
3%
(d) None of the above
đ1