The degree of freedom for the vertical guided roller is ____
Anonymous Quiz
13%
a) 0
44%
b) 1
37%
c) 2
6%
d) 3
👍1
What is the relation between shear at the base of each columns of a portal frame which is pin supported?
Anonymous Quiz
15%
a) They are equal
28%
b) One is double of other
12%
c) One is triple of other
45%
d) Depends upon magnitude of load applied
Required Moment that is to be applied at both ends to produce unit rotation on both the simply supported support is _
Anonymous Quiz
12%
a) EI/L
34%
b) 2EI/L
39%
c) 3EI/L
15%
d) 4EI/L
Pick up the correct statement from the following during tunnel excavation
Anonymous Quiz
8%
a) Oxygen should not be less than 19.5%
9%
b) Carbondioxide should not be more than 0.5%
10%
c) Hydrogen sulphide should not be more than 0.001%
73%
d) All of the above.
Which of the following methods of tunneling is used for long tunnels at great depths?
Anonymous Quiz
22%
a) Army method
33%
b) Needle beam method
35%
c) Austrian method
11%
d) English method
The following operations are required for tunnelling in rocky terrain :
1. Removing the foul gases
2. Marking the tunnel profile 3. Setting up and drilling 4. Checking misfire 5. Mucking The correct sequence is :
1. Removing the foul gases
2. Marking the tunnel profile 3. Setting up and drilling 4. Checking misfire 5. Mucking The correct sequence is :
Anonymous Quiz
14%
a) 1 2 3 4 5
36%
b) 2 3 5 4 1
28%
c) 4 2 1 3 5
22%
d) 2 3 1 4 5
👍2
The automation in operation of public utility services such as bulk water supply and distribution system can be achieved by implementation of
Anonymous Quiz
22%
a) EPANET
10%
b) CCTV
51%
c) SCADA
17%
d) Automatic Weather Stations
Which of the following best describes the structural system of Burj Khalifa ?
Anonymous Quiz
22%
a) Buttressed Core
26%
b) Shear wall-Haunch girder frame
39%
c) Truss-Tube with Interior columns
13%
d) Truss-Tube without Interior columns
👍1
Which of the following shows the correct sequence of the name of Indian river basins in descending order of average annual runoff potential?
Anonymous Quiz
23%
a) Narmada > Godavari > Tapi
48%
b) Godavari> Narmada > Tapi
14%
c) Tapi> Narmada > Godavari
16%
d) Narmada > Tapi > Godavari
GSSSB AAE-192 Posts Advt No 207/2022-23 Exam Pattern Changed.
As Per The New Exam Pattern ,
If you have any dought or need any Help From Our Best Faculty Team then feel free to contact us.
We are available on Below mention Contact details :
Message Or Call Us On :- 7201866333
🧐 Instagrm :-https://instagram.com/websankul_civil_engineering?igshid=MzRlODBiNWFlZA==
❤️ YouTube : https://www.youtube.com/@WebSankulforCivilEngineering
As Per The New Exam Pattern ,
If you have any dought or need any Help From Our Best Faculty Team then feel free to contact us.
We are available on Below mention Contact details :
Message Or Call Us On :- 7201866333
Please open Telegram to view this post
VIEW IN TELEGRAM
Please open Telegram to view this post
VIEW IN TELEGRAM
👍9❤3💩3🔥1👏1👌1
#Super_Duper #Websankulcivilengineering Date:-28/10/2023
👍5🏆3🙏1
Coefficient of permeability or simple permeability is expressed in terms of ____
Anonymous Quiz
45%
a) cm/sec
5%
b) m/day
3%
c) feet/day
47%
d) all of the mentioned
The total head at any point may be regarded as _____ measure with respect to the datum.
Anonymous Quiz
8%
a) potential energy
80%
b) potential energy per unit weight of water
10%
c) unit weight of water
3%
d) volume of water
The assumption made by Boussinesq in the solutions is by the ____
Anonymous Quiz
25%
a) theory of plasticity
57%
b) theory of elasticity
15%
c) yield point
3%
d) failure point
Excess pore pressure is also known as ___
Anonymous Quiz
33%
a) hydrodynamic pressure
37%
b) seepage pressure
25%
c) effective pressure
5%
d) total pressure
For a given material, if E, C, K and m are Young’s modulus, shearing modulus, bulk modulus and Poisson ratio, then which of the following relation is incorrect
Anonymous Quiz
44%
a) E = 9KC/3K + C
22%
b) E = 2K (1 + 2/m)
22%
c) E = 2C (1 + 1/m)
12%
d) E = 3C (1 – 1/m)
👌1
A water main of 1.5 m diameter and 20 mm thick is subjected to an pressure of 1.5N/mm2. Calculate the circumferential stress induced in the pipe.
Anonymous Quiz
10%
a) 78.65 N/mm2
43%
b) 68.45 N/mm2
41%
c) 56.25 N/mm2
6%
d) 60.85 N/mm2
A cantilever carrying a uniformly distributed load W over its full length is propped at its free end such that it is at the level of the fixed end. The bending moment will be zero at its free end also at
Anonymous Quiz
11%
a) Midpoint of the cantilever
28%
b) Fixed point of the cantilever
41%
c) 1/4th length from free end
20%
d) 3/4th length from