Consider the following regarding lime:
1. Lime is obtained by calcination of limestone
2. Quick lime is chemically CaO 3.Hydrated lime is chemically Ca(OH)โ Which statements are correct?
1. Lime is obtained by calcination of limestone
2. Quick lime is chemically CaO 3.Hydrated lime is chemically Ca(OH)โ Which statements are correct?
Anonymous Quiz
8%
1 and 2 only
8%
2 and 3 only
5%
1 and 3 only
79%
All 1, 2, and 3
โค1
Which elastic constant governs resistance to
change in volume?
change in volume?
Anonymous Quiz
18%
Youngโs modulus
29%
Modulus of rigidity
45%
Bulk modulus
9%
Poissonโs ratio
โค3๐1๐1
A body is in equilibrium when
Anonymous Quiz
84%
The sum of forces and sum of moments acting on it are zero
5%
Only the sum of forces is zero
4%
Only the sum of moments is zero
6%
The net force is equal to the net moment
๐5
Forwarded from WebSankul Civil Engineering ๐ทโโ๏ธ ๐๏ธ
Which elastic constant governs resistance to
change in volume?
change in volume?
Anonymous Quiz
18%
Youngโs modulus
29%
Modulus of rigidity
45%
Bulk modulus
9%
Poissonโs ratio
Consider the following regarding bending stress in beams:
1. Maximum bending stress occurs at the extreme fiber.
2. Bending stress is zero at the neutral axis. 3. Bending stress is uniform across the section. Which statements are correct?
1. Maximum bending stress occurs at the extreme fiber.
2. Bending stress is zero at the neutral axis. 3. Bending stress is uniform across the section. Which statements are correct?
Anonymous Quiz
31%
1 and 2 only
11%
2 and 3 only
7%
1 and 3 only
51%
All statements
The partial safety factor for material strength
considering yielding (ฮณm0) as per IS 800:2007 is:
considering yielding (ฮณm0) as per IS 800:2007 is:
Anonymous Quiz
6%
1.00
38%
1.10
37%
1.25
18%
1.50
Which of the following is a water-reducing admixture in concrete?
Anonymous Quiz
63%
Superplasticizer
22%
Air-entraining agent
11%
Retarder
4%
Accelerator
For isotropic material, number of independent
elastic constants is:
elastic constants is:
Anonymous Quiz
14%
1
35%
2
39%
3
12%
4
Which of the following force systems can be
completely analyzed using only two equilibrium
equations (โFx = 0 and โFy = 0)?
completely analyzed using only two equilibrium
equations (โFx = 0 and โFy = 0)?
Anonymous Quiz
36%
Coplanar non-concurrent force system
49%
Coplanar concurrent force system
5%
Non-coplanar force system
10%
Parallel force system
๐4
The bending moment at the free end of a cantilever
beam is always:
beam is always:
Anonymous Quiz
23%
maximum
8%
minimum
67%
zero
2%
negative
๐2
Which method provides uniform reliability?
Anonymous Quiz
23%
Working Stress Method
47%
Limit State Method
24%
Allowable Stress Method
6%
Elastic Method
PVC pipes are preferred due to:
Anonymous Quiz
53%
Corrosion resistance
43%
High thermal conductivity
2%
Heavy weight
2%
Low flexibility
Which factor can slightly affect the value of elastic
constants of a material?
constants of a material?
Anonymous Quiz
28%
Temperature
38%
Poissonโs ratio
9%
Shear modulus
25%
Youngโs modulus
For a lever, the effort is applied at 0.5 m from fulcrum
and load acts at 2 m. Mechanical advantage is
and load acts at 2 m. Mechanical advantage is
Anonymous Quiz
15%
4
61%
0.25
7%
2
17%
1
๐ทโโ๏ธAMC
โ QUESTION PRACTICE BOOK
โจSPECIALLY DESIGNED FOR :
- ADDITIONAL TECHNICAL SUPERVISOR
- ASSISTANT ENGINEER
- ADDITIONAL CITY ENGINEER
MRP 599/-โ
FLAT 67% OFF
๐๐ป199/ - โ
๐๐ปTo Purchase this Book
https://websankulcivilengineering.akamai.net.in/books/7
๐ฑContact Us
72018 66333
๐410, 4th Floor, Suyash Solitaire Building,Kudasan,Gandhinagar 382421
โ QUESTION PRACTICE BOOK
โจSPECIALLY DESIGNED FOR :
- ADDITIONAL TECHNICAL SUPERVISOR
- ASSISTANT ENGINEER
- ADDITIONAL CITY ENGINEER
MRP 599/-โ
FLAT 67% OFF
๐๐ป199/ - โ
๐๐ปTo Purchase this Book
https://websankulcivilengineering.akamai.net.in/books/7
๐ฑContact Us
72018 66333
๐410, 4th Floor, Suyash Solitaire Building,Kudasan,Gandhinagar 382421
Consider The Following Regarding To Bending
Moment:
1. Bending moment is maximum where shear force is zero 2. Bending moment diagram area gives deflection Correct
Moment:
1. Bending moment is maximum where shear force is zero 2. Bending moment diagram area gives deflection Correct
Anonymous Quiz
22%
1 only
15%
2 only
61%
both
2%
neither
โค3
For an axially loaded compression member, Eulerโs
buckling formula is applicable for:
buckling formula is applicable for:
Anonymous Quiz
53%
Slender columns only
8%
Stocky columns only
7%
Tension members
32%
Beams subjected to bending
The main function of gypsum added during the
manufacture of cement is to:
manufacture of cement is to:
Anonymous Quiz
20%
Increase compressive strength
5%
Increase fineness
74%
Regulate setting time
2%
Improve soundness
Which of the following instruments is used to
measure high velocity of fluid in pipelines?
measure high velocity of fluid in pipelines?
Anonymous Quiz
46%
Venturimeter
30%
U-tube manometer
13%
Bourdon gauge
11%
Piezometer
๐ เชเชเซ เชธเชพเชเชเซ 07:30 เชตเชพเชเซ
๐ขGPSC EXAM เชคเซ เชเชตเซ เชเช !
๐๏ธ26/04/2026
โฐเชเชเชฒเชพ เชเชเชพ เชธเชฎเชฏเชฎเชพเช
๐๐ปเชคเซเชฏเชพเชฐเซ เชเซเชตเซ เชฐเซเชคเซ เชเชฐเซเช ?
โ Live Session Link
https://www.youtube.com/live/oxYE0Yk0M-Y?si=ThhEXIV97BPvf2Yi
๐Contact Us
72018 66333
๐ขGPSC EXAM เชคเซ เชเชตเซ เชเช !
๐๏ธ26/04/2026
โฐเชเชเชฒเชพ เชเชเชพ เชธเชฎเชฏเชฎเชพเช
๐๐ปเชคเซเชฏเชพเชฐเซ เชเซเชตเซ เชฐเซเชคเซ เชเชฐเซเช ?
โ Live Session Link
https://www.youtube.com/live/oxYE0Yk0M-Y?si=ThhEXIV97BPvf2Yi
๐Contact Us
72018 66333