The Mohs scale is used to measure
Anonymous Quiz
6%
Density of minerals
82%
Hardness of minerals
9%
Specific gravity
3%
Cleavage
❤1
The estimate prepared to revise the cost of a sanctioned project due to rate changes is called
Anonymous Quiz
18%
Supplementary estimate
75%
Revised estimate
7%
Annual repair estimate
1%
Original estimate
The coefficient of consolidation (Cv) has the units of
Anonymous Quiz
60%
m²/sec
22%
m/sec
16%
sec/m²
2%
m²
❤2
In a doubly reinforced beam, compression reinforcement is provided mainly to
Anonymous Quiz
15%
Reduce shear
63%
Reduce deflection
4%
Reduce cost
18%
Increase ductility
👌1
The factor that converts mixed traffic into equivalent passenger cars is called
Anonymous Quiz
68%
PCU factor
25%
Volume capacity ratio
2%
Road user cost
4%
Traffic density
The net safe bearing capacity is obtained by dividing ultimate bearing capacity by
Anonymous Quiz
14%
Settlement factor
14%
Load factor
71%
Factor of safety
1%
Shape factor
Efflorescence in bricks is mainly caused due to
Anonymous Quiz
5%
Excess clay
72%
Soluble salts
22%
High temperature burning
1%
Over compaction
🛑 આજે સાંજે 06:30 વાગે
🎊FREE...FREE....FREE....
🔥મહાસંગ્રામ 🔥
3rd Free Lecture
Introduction of BIS Code of Practice for Architectural & building drawings
By FENI MA'AM
📍 Live Session Link
https://www.youtube.com/live/ylP7hZADCxA?si=0bXoYdAcDksaJ5mw
📱Contact Us
72018 66333
🎊FREE...FREE....FREE....
🔥મહાસંગ્રામ 🔥
3rd Free Lecture
Introduction of BIS Code of Practice for Architectural & building drawings
By FENI MA'AM
📍 Live Session Link
https://www.youtube.com/live/ylP7hZADCxA?si=0bXoYdAcDksaJ5mw
📱Contact Us
72018 66333
🫡2
🛑 આજે સાંજે 06:30 વાગે
🎊FREE...FREE....FREE....
🔥મહાસંગ્રામ 🔥
3rd Free Lecture
Introduction of BIS Code of Practice for Architectural & building drawings
By FENI MA'AM
📍 Live Session Link
https://www.youtube.com/live/ylP7hZADCxA?si=0bXoYdAcDksaJ5mw
📱Contact Us
72018 66333
🎊FREE...FREE....FREE....
🔥મહાસંગ્રામ 🔥
3rd Free Lecture
Introduction of BIS Code of Practice for Architectural & building drawings
By FENI MA'AM
📍 Live Session Link
https://www.youtube.com/live/ylP7hZADCxA?si=0bXoYdAcDksaJ5mw
📱Contact Us
72018 66333
❤2
🛑 FENI MA'AM is LIVE
મહાસંગ્રામ
3rd Free Lecture
👉Don't forget to join
✔️LINK to JOIN
https://www.youtube.com/live/ylP7hZADCxA?si=0bXoYdAcDksaJ5mw
મહાસંગ્રામ
3rd Free Lecture
👉Don't forget to join
✔️LINK to JOIN
https://www.youtube.com/live/ylP7hZADCxA?si=0bXoYdAcDksaJ5mw
✅DAILY QUESTION PRACTICE QUIZ FOR GSSSB-ADDITIONAL ASSISTANT ENGINEER👷🏻-824 POSTS-(ADVT NO. :-303/202526)
The maximum principal strain theory of failure is also known as
Anonymous Quiz
38%
Rankine theory
45%
St. Venant theory
12%
Tresca theory
5%
Von Mises theory
The carry-over factor for a prismatic member fixed at both ends is
Anonymous Quiz
20%
0
29%
1
27%
0.33
24%
0.5
The specific gravity of cement is generally taken as
Anonymous Quiz
5%
2.15
18%
2.65
10%
3.65
67%
3.15
The deviation of the magnetic needle from the magnetic meridian due to the presence of nearby metallic objects or electric currents is called
Anonymous Quiz
3%
Bearing
9%
Dip
28%
Declination
60%
Local attraction
If an activity is expedited by deploying additional resources beyond the normal level, it generally results in an increase in
Anonymous Quiz
39%
Project completion time
39%
Total project cost
19%
Float of the activity
4%
Latest start time
❤3
A gusset plate is primarily used in steel structures to
Anonymous Quiz
79%
Connect members at joints
4%
Prevent corrosion
8%
Reduce buckling
9%
Increase stiffness
The process of burning limestone to produce quicklime is known as
Anonymous Quiz
57%
Calcination
10%
Hydration
16%
Carbonation
17%
Slaking
❤1
The shear strength of saturated clay under undrained condition depends mainly on
Anonymous Quiz
55%
Angle of internal friction
28%
Cohesion only
14%
Effective stress
2%
Density