WebSankul Civil Engineering 👷‍♂️ 🏗️
10.6K subscribers
4.08K photos
144 videos
937 files
4.19K links
For Enquiry : 72018 66333

Social Platforms :

YouTube : https://bit.ly/WebSankulCivilEngineering

Instagram : https://bit.ly/CivilEngineeringWebSankul
Download Telegram
In case of isolated footings, offset provided in concrete bed on all sides is :
Anonymous Quiz
47%
a) 15 cm minimum
33%
b) 10 cm minimum
15%
c) 5 cm minimum
4%
d) 10 cm maximum
The ultimate bearing capacity and unit weight of soil are 300 kN / m ^ 2 and 20 kN / m ^ 3 respectively. The depth of foundation is 1 m, factor of safety is 2.5, the net safe bearing capacity is
Anonymous Quiz
14%
a) 100kN / m ^ 2
31%
b) 80kN / m ^ 2
47%
c) 112kN / m ^ 2
8%
d) 100.5kN / m ^ 2
Bitumen stabilization is suitable for
Anonymous Quiz
31%
a) Clayey soil
41%
b) Sandy soil
16%
c) Peaty soil
12%
d) Silty soil
👏1💯1🏆1
The ratio of modulus of rigidity and modulus of elasticity (G / E) for any elastic isotropic material is :
Anonymous Quiz
19%
a) less than 1/2
30%
b) less than 1/3
22%
c) more than 1/3
28%
d) both (a) and (c)
This media is not supported in your browser
VIEW IN TELEGRAM
On field there is one man who destroys bowlers with his tremendous hits and on other hand in civil engineering field also there is a next level faculty who destroys your all tension about your preparation with two surprise gifts
Stay tuned on 5/11/2023
Time - 7 PM

✅ Stay Tune With WebSankul Official YouTube Channel

✔️ Follow Us on WebSankul Civil Engineering Social Platforms :⤵️

😁 Telegram  💂 Instagram 📹 YouTube
Please open Telegram to view this post
VIEW IN TELEGRAM
👍3🏆2❤1
Degree of static indeterminacy of a rigid jointed plane frame having 15 members, 3 reaction components and 14 joints is-
Anonymous Quiz
8%
(a) 2
37%
(b) 3
44%
(c) 6
11%
(d) 8
A two hinged arch of span 40m carries a point load of 62.8 kN at its crown.The thrust in the arch is .
Anonymous Quiz
10%
(a) 20
24%
(b) 40
51%
(c) 31.0
15%
(d) 62.8
In fixed arch structure, .......... nos. of hinges are necessary.
Anonymous Quiz
13%
(a) one
46%
(b) three
22%
(c) two
19%
(d) zero
નમસ્તે વિદ્યાર્થીમિત્રો,

🦺 ગુજરાતના Civil Engineers માટે WebSankul લઈને આવી રહ્યું છે “ધમાકેદાર સરપ્રાઈઝ” 🎁

⏳ વિદ્યાર્થીમિત્રોના ચહીતા એવા Next Level Faculty આવી રહ્યા છે 5 નવેમ્બરે સાંજે 7:00 PM વાગે Only on WebSankul Civil Engineering યુટ્યુબ ચેનલ પર.

🔖 તો Free Launching અને દિવાળી ગિફ્ટ સાથે મળીએ 5 નવેમ્બરે સાંજે 7:00 PM વાગ્યે.

📩 Subscribe Now : https://www.youtube.com/channel/UCKRVQ4hFemjL8gmN02vGkfg

📍 Join Now :
https://youtube.com/@WebSankulAcademy?si=U5uUz8fmwyDe7RMq

Join us on telegram
https://t.me/websankul_civil_engineering
❤3👍1🎉1
⚠️ WebSankul Civil Engineering લોન્ચ થવા જય રહ્યું છે.
🦺 GPSC Civil Engineering Students માટે હવે મળશે WebSankul સાથે Civil Engineering ના કોન્સેપ્ટ શીખવા મળશે જે તેમની સરકારી સિવિલ ઇજનેર બનવામાં ખૂબ મદદરૂપ થશે.
🔴 તો તૈયાર થઈ જાવ વેબસંકુલની આ નવી સફર સાથે આજે જ અને આવી જાઓ લાઈવ જાણવા માટે શું ખાસ લઈને આવી રહ્યા છીએ તમારી માટે...

📌 https://youtube.com/live/9NNLyhnEIeg?feature=share
❤7🔥1🎉1🫡1
Which of the following soil types, in their fully saturated condition would have the highest hydraulic conductivity?
Anonymous Quiz
19%
(a) Silty clay
39%
(b) Clayey silt
14%
(c) Fine sand
28%
(d) Coarse sand
❤3
Liquid limit test is performed on soil samples passing through IS sieve of size
Anonymous Quiz
11%
(a) 25 μ
11%
(b) 2 mm
76%
(c) 425 μ
2%
(d) 250 μ
❤2
The core-cutter method for determining in-situ unit weight is suitable for
Anonymous Quiz
14%
(a) Soils containing gravel particles
18%
(b) Stiff clays
58%
(c) Soft cohesive soils
10%
(d) Sandy soils
❤2
In the laboratory, the coefficient of permeability of soil is determined by one of the following methods-
Anonymous Quiz
16%
(a) Pumping-out test
13%
(b) Pumping-in test
18%
(c) Horizontal capilarity test
53%
(d) Constant Head test
❤2
Which one of the following is the mode of failure in a fillet weld material?
Anonymous Quiz
13%
(a) Tension
62%
(b) Shear
19%
(c) Bearing
7%
(d) Crushing
🔥3❤2
The metal added at the joint while welding is known as ........
Anonymous Quiz
4%
(a) weld metal
26%
(b) filler
19%
(c) fillet metal
51%
(d) all the above are correct
❤1👌1